Advertisement
Table of Contents
¨
Model No. WLTL62790
Serial No.
Find the serial number in the location
shown below. Write the serial number
in the space above for reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through di-
rect assistance from our factory.
TO AVOID UNNECESSARY DE-
LAYS, PLEASE CALL DIRECT TO
OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our Customer Hot Line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Visit our website at
www.weslo.com
new products, prizes,
fitness tips, and much more!
Advertisement
Table of Contents
Related Manuals for Weslo WLTL62790
Summary of Contents for Weslo WLTL62790
- Page 1 ¨ Model No. WLTL62790 Serial No. Find the serial number in the location shown below. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you...
-
Page 2: Table Of Contents
¨ TABLE OF CONTENTS IMPORTANT PRECAUTIONS ..............3 BEFORE YOU BEGIN . -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. - Page 4 provides information with respect to proper grounding of the mast and supporting struc- ture, grounding of the lead-in wire to an an- tenna discharge unit, size of grounding con- ductors, location of antenna discharge unit, connection to grounding electrodes, and re- quirements for the grounding electrode.
- Page 5 the unit is in proper operating condition (refer to the drawing below). ¥ Use No. 10 AWG (5.3mm AWG (8.4mm ) aluminum, No. 17 AWG (1.0mm ) copper-clad steel or bronze wire, or larger as a ground wire. ¥ Secure antenna lead-in and ground wires to house with stand-off insulators spaced from 4 to 6 feet (1.22 to 1.83m) apart.
-
Page 6: Before You Begin
The model number of the treadmill is WLTL62790. The serial number can be found on a decal attached to the tread- mill (see the front cover of this manual for the location). -
Page 7: Assembly
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. - Page 8 4. Remove the Lock Knob (54) from the Lock Pin (59). Press the Lock Knob Sleeve (55) into the left Upright (61). Make sure that the Lock Pin Collar (57) and the Spring (56) are on the Lock Pin. Insert the Lock Pin into the left Upright (61) and tighten the Lock Knob onto the Lock Pin.
-
Page 9: Treadmill Operation
THE PERFORMANT LUBE WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. They will deteriorate the walking belt and cause excessive wear. - Page 10 CONSOLE DIAGRAM Note: If there is a thin sheet of clear plastic on the face of the console, remove it before operating the console. FEATURES OF THE CONSOLE The treadmill console is designed to make your work- outs more enjoyable and effective. As you exercise, the integral color TV will show your favorite television programs while the LCD displays show the elapsed time, the distance you have walked, the approximate...
- Page 11 Insert the key into the console. Inserting the key will not turn on the displays. The dis- plays will turn on when the ON/ RESET button is pressed or when the walking belt is started. Note: If you just installed batteries, the displays will already be on.
-
Page 12: Television Operation
TELEVISION OPERATION DIAGRAM OF THE TELEVISION 1. Power indicator (Note: The power indicator will remain on whenever the on/off switch is on.) 2. POWER button 3. CHANNEL buttons 4. VOLUME + and Ð buttons 5. Compartment door (IMPORTANT: The treadmill and TV, like any other electronic equipment, can be damaged by static electricity. - Page 13 Outdoor Antenna Outdoor antennas are subject to weathering that can reduce signal quality. Inspect the antenna and lead-in wiring before connecting the antenna. Any service cen- ter can explain the various outdoor antennas available. Combination VHF/UHF Antennas 300 Ohm Flat Wire 75 Ohm Terminal on Treadmill...
- Page 14 CHANNEL PROGRAMMING Memorizing Channels The TV is equipped with a channel memorizing func- tion that allows you to step up or down from the current channel to the next channel set into memory. Before channels can be selected in this way, they must be set into the TVÕs memory.
- Page 15 Manually Searching for and Storing Channels 1. Press the MENU button to turn on the pop-up menu. Press the MENU button again to select CH MEMORY. 2. Press the + or Ð button to move the arrow to SEARCH/SKIP. Select SEARCH/SKIP by press- ing the MENU button.
- Page 16 PICTURE LEVEL ADJUSTMENTS Picture level controls are preset to nominal levels. If desired, you can individually adjust the contrast, bright- ness, color, or tint by following the steps below. 1. Press the MENU button to turn on the pop-up menu. 2.
- Page 17 Setting the Channel to be Recorded 1. After the on timer has been set, press the MENU button repeatedly to select ON CH (on channel). 2. Press the + button to cycle through the channels until the desired channel is selected. 3.
-
Page 18: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. -
Page 19: Trouble-Shooting
TROUBLE-SHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). PROBLEM: The power does not turn on SOLUTION: a. - Page 20 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
- Page 21 PROBLEM: TV reception is poor SOLUTION: a. For the television to operate properly, good reception is necessary. If you are using an antenna, make sure that it is properly connected and that it is adjusted for optimal reception. (See AN- TENNA CONNECTIONS on page 12.) b.
-
Page 22: Conditioning Guidelines
CONDITIONING GUIDELINES WARNING: Before beginning this or any exercise program, consult your physi- cian. This is especially important for individu- als over the age of 35 or individuals with pre- existing health problems. The pulse sensor is not a medical device. Various factors, including your movement, may affect the accuracy of heart rate readings. -
Page 23: Part List
PART LISTÑModel No. WLTL62790 To locate the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual. No. Qty. Description Left Foot Rail Hood Screw Plastic Washer Isolator Isolator Screw Platform Screw Frame Pivot Nut... - Page 24 EXPLODED DRAWINGÑModel No. WLTL62790 R1099A...
- Page 25 EXPLODED DRAWINGÑModel No. WLTL62790 R1099A...
-
Page 26: Ordering Replacement Parts
If possible, place the treadmill near your telephone for easy reference when calling. WESLO is a registered trademark of ICON Health & Fitness, Inc. ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of ninety (90) days from the date of pur- chase.