Kia Niro Hybrid Owner's Manual page 322

Audio system
3. Conýirm that the device name (ve‐
hicle name) in your Bluetooth
vice matches the device name (ve‐
hicle name) shown on the audio
screen, then select it.
4. 1. For devices that require passkey
entry, a passkey entry screen is
shown on your Bluetooth
vice.
- Enter the passkey
shown on the audio screen, in
®
your Bluetooth
2. For devices that require passkey
conýirmation, the
screen is shown on the audio
system. A 6-diþit passkey input
screen is shown in the Blue‐
®
tooth device.
6-26
- Aýter conýirminþ that the 6-
®
de‐
NOTICE
®
de‐
The 6-diþit passkey in the imaþe
0000 ,
above is an example. Reýer to your
vehicle ýor the actual passkey.
device.
Pairinþ a second Bluetooth
Press the
audio system
lect [Connections]
ýollowinþ
diþit passkey on the audio
®
screen and the Bluetooth
vice are identical, press [OK] in
®
your Bluetooth device.
®
device
/ button on the
Select [Phone]
Select [Add New]
The pairinþ procedure ýrom this point
-
is identical to [Pairinþ the ýirst Blue‐
®
de‐ tooth device].
NOTICE
• Bluetooth ®
standby mode lasts
ýor three minutes. Iý a device is
not paired within three minutes,
pairinþ is canceled. Start over ýrom
the beþinninþ.
• For most Bluetooth
connection is established auto‐
matically aýter pairinþ. Some devi‐
ces, however, require separate
Se‐
conýirmation when connectinþ aý‐
ter pairinþ. Be sure to check your
®
Bluetooth device aýter pairinþ to
conýirm that it has connected.
Connecting Bluetooth
Iý there are no connected devices
Select the /
audio system or the [CALL] button in
the steerinþ wheel remote control
List oý paired Bluetooth
lect the desired Bluetooth
the list Connect Bluetooth
®
devices, a
®
devices
button on the
®
devices Se‐
®
device ýrom
®
.