Engine Oil Change - Honda EU3000is Owner's Manual

ENGINE OIL CHANGE

Drain the oil while the engine is warm to assure rapid and complete draining.
1. Open and remove the oil maintenance cover.
2. Place a suitable container below the engine to catch the oil, then remove the
drain plug and sealing washer, remove the oil filler cap, and drain the oil.
3. Reinstall the oil drain plug and a new sealing washer. Tighten the plug
securely.
Torque: 13.0 lbf·ft (17.7 N·m, 1.8 kgf·m)
4. With the generator in a level position, fill with the recommended oil to the
upper limit. Do not overfill.
• "Upper limit" means the oil exists to the oil filler neck.
Refer to "ENGINE OIL RECOMMENDATIONS" in page 12.
Maximum oil capacity: 18 oz (0.55 L)
5. Reinstall the oil filler cap and tighten it securely.
6. Reinstall, close, and latch the oil maintenance cover.
OIL DRAIN PLUG
OIL MAINTENANCE
COVER
OIL FILLER CAP
Wash your hands with soap and water after handling used oil.
SERVICING YOUR GENERATOR
UPPER LIMIT
(The oil exists to the
oil filler neck.)
51