TYRE PRESSURE LOSS WARNING
6
5
Resetting procedure
Ignition on, vehicle stopped:
– repeatedly tap the 6 switch as many
times as necessary to reach the "ve-
hicle" tab
;
– briefly press the 3 or 4 switch to
reach the "Tyre pressure init. long
press" page;
– press and hold the 5 OK switch to
launch the reset.
2.34
(3/6)
Hold down the 5 switch until the
"Operation completed" message ap-
pears. You can now drive.
3
4
If the vehicle is equipped with a nav-
igation system, the resetting proce-
dure may also be carried out using
the multimedia screen: please see
the equipment instructions.