Gear Selector Override - Dodge Charger Police 2020 Owner's Manual Supplement

GEAR SELECTOR OVERRIDE

If a malfunction occurs and the gear selector
cannot be moved out of the PARK position, you
can use the following procedure to temporarily
move the gear selector:
1. Turn the engine OFF.
2. Firmly apply the parking brake.
3. Tilt the steering wheel to the full up position.
4. Press and maintain firm pressure on the
brake pedal.
5. Insert a screwdriver or similar tool into the
access port (ringed circle) on the knee
bolster located below the steering column,
push and hold the override release lever up.
IN CASE OF EMERGENCY
Gear Selector Override Location
6. Move the gear selector to the NEUTRAL
position.
7. The vehicle may then be started in
NEUTRAL.
35
6