Displaying Information; To Set Up The Hp 16505A Workspace; To Display The Format Specification - HP E2466C User Manual

Displaying Information

This section describes how to display logic analyzer configuration
information, state and timing data captured by the preprocessor
interface, and symbol information that has been set up by the
preprocessor interface configuration software.

To set up the HP 16505A workspace

To set up the HP 16505A workspace, drag and drop the "Pentium II"
Instrument icon into the workspace area. Next, drag and drop a
Listing Display on the "Pentium II" Instrument icon in the workspace.
Double click on the Listing icon to open the Listing window and verify
that the label "Pentium II Inverse Assembly" appears.

To display the format specification

•
Using the mouse, right-click and hold on the instrument icon for the
logic analyzer. In the pop-up menu, slide down to "Format..." then
release the mouse button.
The HP E2466C configuration files contain predefined format specifications.
These format specifications include all labels for monitoring the
microprocessor bus.
Chapter 3 of this guide contains a table that lists the signals for the
Pentium II processor and on which pod and probe line the signal comes to
the logic analyzer. Refer to this table and to the logic analyzer connection
information for your analyzer in chapter 1 to determine where the processor
signals should be on the format specification screen.
Preprocessor Interface for the Pentium II Processor 2-3