Power Cord Protection; Damage Requiring Service - Roadstar RCR-4625NU User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
PRECAUTION
INSTRUCTIONS - All the safety and operating instructions should be read before
the radio is operated. The manual should be retained for future reference.
HEED WARNINGS - All warnings on the appliance and in the operating instruc-
tions should be adhered to.
WATER AND MOISTURE - The appliance should not be used near liquids or in
rooms with a high level of humidity.
VENTILATION - The appliance should be situated so that its location or position
does not interfere with its proper ventilation.
HEAT - The appliance should be situated away from heat sources such as radia-
tors, stoves or other appliances that produce heat.
POWER SOURCE - The radio should be connected to power supply only of the
type described in the operating instructions or as marked on the appliance.

POWER CORD PROTECTION -

are not likely to be walked on or pinched by items placed upon/against them.
OBJECT AND LIQUID ENTRY - Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure through openings.

DAMAGE REQUIRING SERVICE

The appliance should be serviced by qualified service personnel when:
- The power supply cord or plug has been damaged;
- Objects have fallen into or liquids has been spilled into the radio;
- The appliance has been exposed to rain;
- The appliance has been dropped or the enclosure damaged;
- The appliance does not appear to operate normally.
SERVICING - The user should not attempt to service the appliance beyond that
descrive in the user operating instructions. All the servicing should be referred to
qualified service personnel
Note: If the display does not function properly or no reaction to operation of any con-
trol may due to the electrostatic discharge. Switch off and disconnect the AC cord and
remove all the batteries, then turn the power back on after a few seconds.
English
Power supply cords should be routed so that they
2

Advertisement

Table of Contents
loading

Table of Contents