Draining Fuel/Water Separator Filter - Jeep Grand Cherokee 2018 Manual

Engine Air Cleaner Filter Removal
1. Release the spring clips from the air cleaner
cover.
Air Cleaner Filter Cover
1 — Spring Clips
2 — Air Cleaner Filter Cover
2. Lift the air cleaner cover to access the air
cleaner filter.
38
Open Air Cleaner Filter Assembly
1 — Air Cleaner Filter
2 — Air Cleaner Cover
3. Remove the air cleaner filter element from
the housing assembly.
Air Cleaner Filter
1 — Air Cleaner Filter Inspection Surface
2 — Air Cleaner Filter
Engine Air Cleaner Filter Installation
NOTE:
Inspect and clean the housing if dirt or debris is
present before replacing the air filter element.
1. Install the air cleaner filter element into the
housing assembly with the air cleaner filter
inspection surface facing downward.
2. Install the air cleaner cover onto the housing
assembly locating tabs.
3. Latch the spring clips and lock the air cleaner
cover to the housing assembly.

Draining Fuel/Water Separator Filter

The fuel filter/water separator housing is located
on the left side of the vehicle in front of the fuel
tank. The best access to this water drain valve is
from under the vehicle.
CAUTION!
• Do not drain the fuel/water separator filter
when the engine is running.
• Diesel fuel will damage blacktop paving
surfaces. Drain the filter into an appropriate
container.