Pyle SereneLife PSLHTM20 User Manual

Pyle SereneLife PSLHTM20 User Manual

Cordless handheld grass cutter shears electric hedge shrubber trimmer built-in 3.6v rechargeable battery (changeable blades)

Advertisement

by
PSLHTM20
Cordless Handheld Grass Cutter Shears
Electric Hedge Shrubber Trimmer
Built-in 3.6V Rechargeable Battery
(Changeable Blades)
www.PyleUSA.com

Advertisement

Table of Contents
loading

Summary of Contents for Pyle SereneLife PSLHTM20

  • Page 1 PSLHTM20 Cordless Handheld Grass Cutter Shears Electric Hedge Shrubber Trimmer Built-in 3.6V Rechargeable Battery (Changeable Blades) www.PyleUSA.com...
  • Page 2: Workplace Safety

    CAUTION: Read all safety regulations and instructions. Failures made in following the safety regulations and instructions may result in an electric shock, re and/or serious injury. Keep all safety regulations and instructions in a safe place for future use. The term “electric tool“ is used in the safety regulation that refers to electric tools operated from the mains power supply (with a power cable) and to battery operated electric tools (without a power cable).
  • Page 3: Additional Safety Notes

    4. USING THE TREATMENT OF ELECTRIC TOOLS. Do not overload your tool. Only use suitable electric tools to perform your work. • Using the right electric tool allows you to work better and safer within the tool’s quoted capacity range. •...
  • Page 4 • Protect the battery charger and its cable from damage and sharp edges. Have damaged cables repaired without delay by a quali ed electrician. • Make sure that the contacts of the battery pack do not come into contact with other metallic objects such as nails or screws.
  • Page 5 www.PyleUSA.com...
  • Page 6: Proper Use

    1. Grass Cutter Blade 2. Shrub Cutter Blade 3. Safety Lock-o ON/OFF Button 5. Blade Guard 6. Battery Charger PROPER USE The equipment is designed for cutting the edges of lawns and small areas of grass in private and hobby gardens.
  • Page 7 Changing the blades IMPORTANT! Risk of injury! To remove the blades, raise the lug (Fig 4 / Item 1) and push off the cover (Fig. 4 / item 2) in direction of the arrow. Once you have removed the blade you will be able to see the toothed wheels of the gear unit (Fig. 5). Make sure that no dirt gets into the gear unit when you change the blade.

Table of Contents