Planet Networking & Communication WDRT-730 User Manual page 54

Object
Band
SSID
Channel Number
Associated Clients
Root AP SSID
Figure 5-26
Please select the band you want to use; all the wireless routers
connected to each other must use the same setting.
2.4GHz:
 N (for 802.11n clients only and maximal rate is up to 300Mbps)
 B+G (for 802.11b/g clients only and maximal rate is up to
54Mbps)
 G (for 802.11g clients only and maximal rate is up to 54Mbps)
 B+G+N (for 802.11b/g/n clients only and maximal rate is up to
300Mbps)
5GHz
 A (for 802.11a clients only and maximal rate is up to 54Mbps)
 A+N (for 802.11a/n clients only and maximal rate is up to
300Mbps)
Input the SSID of your wireless router, and the setting should be the
same with all other wireless routers for the convenience of roaming.
Select the channel you want to use; all the wireless routers connected
to each other must use the same setting.
Click Show Active Clients button to see the status of all active
wireless stations that are connecting to the access point.
In Universal Repeater mode, this device can act as a station to
connect to a Root AP. Please assign the SSID of the Root AP here or
click Site Survey button below to choose a Root AP.
Table 5-19
-47-
User Manual of WDRT-730
Description