Object
Time Zone
Time Server Address
Daylight Savings
5.2.1.2.
Password Settings
You can change the factory default password of the Router on the screen as shown in
Please input the current password once and the new password twice to confirm.
It is strongly recommended that you should change the factory default password of
the Router. The new password must not exceed 30 characters in length and not
include any spaces.
Click the APPLY button to save the changes.
Figure 5-4 Time settings
Select your local time zone from this pull-down list.
Enter the address for the NTP Server here. The Router will get the
time from the NTP Server preferentially.
If you want to enable daylight savings setting, please check Enable
box, and set the duration of daylight setting.
Table 5-1
Figure 5-5 Password
-24-
User Manual of WDRT-730
Description
Figure 5-5