Samsung DV45H Series Service Manual page 19

Part
Drum Removal
Sensor
(Thermistor,
Thermostat)
Removal
figure
1. Disconnect the Power Ssupply to the unit
2. Remove the Top Cover, the Console, the Front
3. Remove Belt
4. Remove the Drum
1. Disconnect the power supply to the unit
2. Remove the Top Cover, the Console, and the Front
3. Remove 2 Housing Sensor
4. Remove the Sensor
Description
Panel, the Plate(u), and the Front Bulkhead
When reassemble the belt , make it located
between 2 red arrows.
Panel
Do not apply excessive force to the terminal.
Removal and Reassembly _ 17