Advertisement
STANDALONE Mode:
Green light Mode Indicator periodically blinks three times
Type 1 Installation:
Plugin optional OBD cable to any of Data Bus Port 1 or 2
Type 2 Installation:
Connect to vehicle wiring using the provided standalone cable
Standalone connector
1
Yellow
(+) Ignition Input
2
Green
(-) 500mA Lock Output
3
Orange
(-) 500mA Starter Interrupt Output
4
White
(-) Sensor Trigger Input
5
Red
(+) 12V Constant Power Input
6
Blue
(-) 500mA Unlock/Parking Light Output
7
Black
(-) Chassis Ground Input
8
Brown
(-) Sensor 2 Trigger
Installation Test:
•
Wait for the Mobilink to connect to the Cellular network – yellow indicator light steady ON
•
Press and release the Test Button (~1sec) to activate the Lock and Unlock outputs
Type 3
GPS-Red
Mode-Green
Cellular-Yellow
Data
Data
Standalone
Bus
Bus
2
1
Test
Butt
8
Advertisement
