Advertisement
ALCA Mode:
Green light Mode Indicator periodically blinks two times
IdataLink
ALCA
Data
Port
Installation:
Plugin provided loop connector to Data port 1
Plugin iDataLink ALCA or StartLink modules to Data port 2 connector
Connect to vehicle wiring using the provided standalone cable
Standalone connector: RED, BLACK, AND YELLOW MUST BE CONNECTED
1
Yellow
2
Green
3
Orange
4
White
5
Red
6
Blue
7
Black
8
Brown
Installation Test:
•
Wait for the Mobilink to connect to the network – yellow light indicator steady ON
•
Press and release the Test Button (~1 sec) to activate the Lock and Unlock outputs
•
Press and release the Test Button (~3 sec) to activate/deactivate the starter
7
Optional
StartLink
Data
Bus 2
Data
Port 1
(+) Ignition Input
(-) 500mA Lock Output
(-) 500mA Starter Interrupt Output
(-) Sensor Trigger Input
(+) 12V Constant Power Input
(-) 500mA Unlock/Parking Light Output
(-) Chassis Ground Input
(-) Sensor 2 Trigger
Type 2
Data
Port 2
GPS-Red
Mode-Green
Cellular-Yellow
Data
Port 1
Standalone
Test Button
Advertisement
