4. Assembling and Installing
5.
Remove the retainers.
After installation is complete, remove the retainers and packing material.
Retainer
can be installed on the bottom of the machine for storage after removal.
Remove all retainers. Any that remain may cause faulty operation or breakdown when the
power is switched on.
Store the retainers because they are needed again when transporting the machine.
Installing the Roland Ink System
About this procedure
This procedure must be performed by a suitably qualified service technician. Never attempt to perform this
procedure yourself.
CAUTION
Items used in this procedure
Roland Ink System
Printer unit accessories
32
Leave this work to a suitably qualified worker.
This procedure includes work near sources of electrical danger and complex
assembly work. Incorrect work may result in injury and mechanical malfunction.
1 set
Tube caps
Cleaning stick