Sensor Drains Batteries Quickly; Humidity Shows Ofl But Temperature Works; Fahrenheit/Celsius; Hi | Lo Temperature/Humidity Records - La Crosse Technology 327-1417 Faqs

 The units try for 20 minutes to reconnect. After 20 minutes, the sensor stops
trying for an hour (to preserve battery life). After the 1-hour break, the sensor
will start another 20-minute re-connect cycle.
Distance/Resistance

one wall, window, tree etc., between the display and the sensor. UV coated
windows may actually reflect the signal. Stucco walls will absorb the signal.
 Check batteries. This is our primary warranty issue.
 Test a new set of alkaline batteries. Write down the date of installation and the
voltage of the batteries.
 When the batteries fail, please note the date and voltage again. This is helpful in
determining the problem.
 Check the distance and resistance between the sensor and Wind speed station.
Sensors at the end of the range may work while batteries are fresh but not after
they drain a bit.
 Check for leaking batteries, which may damage the sensor.

HUMIDITY SHOWS OFL BUT TEMPERATURE WORKS

 The humidity low range is 10% RH. If your local humidity is below 10%, you
will see this reading.
 Complete a restart with fresh batteries.
 Replace the sensor.
 Enter the program menu to select in Fahrenheit (ºF) or Celsius (ºC).

HI | LO TEMPERATURE/HUMIDITY RECORDS

Press and release the TEMP button to view HI/LO, temperature and humidity
readings with time/date stamp. Press and release TEMP again to view the next
value.
• Outdoor temperature HIGH
• Outdoor temperature LOW
• Outdoor humidity HIGH
• Outdoor humidity LOW
• Indoor temperature HIGH
• Indoor temperature LOW
• Indoor humidity HIGH
• Indoor humidity LOW
• Feels like HIGH
• Feels like LOW
• Dew Point
La Crosse Technology, Ltd.
can cause loss of sensor signal. Avoid having more than

SENSOR DRAINS BATTERIES QUICKLY

FAHRENHEIT/CELSIUS

Page 5