Page 1
Micro CD/MP3 Player with FM Radio & USB/SD/Bluetooth NS-442 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Head all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instruc- tions.
FCC WARNINGS WARNING: Changes or modifications to this unite not expressly approved by the party responsi- ble for complaince could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
WELCOME Thank you for purchasing the Micro system Player NS-442. In order to fully benefit from this product, please follow the instructions in this user manual very carefully. Store this user manual in a safe place for future reference. We...
PRODUCT OVERVIEW Front View Rear View 1. REMOTE SENSOR 11. FUNCTION BUTTON 2. POWER BUTTON 12. AUX IN JACK 3. STANDBY INDICATOR 13. PHONE JACK 4. PLAY/PAUSE BUTTON 14. SD/MMC SLOT 5. STOP/USB/SD BUTTON 15. USB PORT 6. LCD DISPLAY 16.
Page 6
PRODUCT OVERVIEW - Continued 1. REMOTE SENSOR 10. REPEAT/ PROGRAM/ TIME 2. POWER BUTTON BUTTON - Press to power on or off. - Repeat a track in CD/MP3/USB/SD 3. STANDBY INDICATOR mode. 4. PLAY/PAUSE BUTTON - Play modes: normal->repeat 1->re- - Play or pause MP3/CD/USB/SD/BT.
CLOCK ADJUSTMENT To setup the time of the unit: 1. Connect the AC power cord (The following operation must be done in stand- by mode). 2. Press the TIME/PROGRAM button to enter into time setting mode. The time will flash on the LCD display. 3.
BLUETOOTH® FUNCTION Press the FUNCTION button to select Bluetooth mode. Search for the Bluetooth device “ NS-442” on your mobile device. Select the device from your handset in order to establish a connection. 1. Press PLAY/PAUSE button to play or pause playback.
AUX-IN FUNCTION The NS-442 includes an Aux in jack which enables connection to any external audio device such as MP3, Discman or Walkman. 1. Connect your external audio device to the AUX in of the micro system. 2. Select the function to AUX. Play the music from your audio device to hear it through the speakers.
Page 11
CD/MP3 PLAYER FUNCTION - Continued Selecting a different track. During playback you can use the Back or Next buttons to select a particular track. If you have selected a track number while in stop or pause position, press play to start playback. Press next once briefly for the next track, or press repeatedly until the desired track number appears on the display.
USB FUNCTION 1. Select the USB/SD function to enter USB/SD mode. 2. Press NEXT or BACK to advance or go back. 3. Program up to 99 tracks in MP3 mode. 4. Play Modes: there are 4 different play modes: Normal->Repeat 1-> Repeat all ->...
TROUBLESHOOTING SYMPTOM CAUSE SOLUTION CD player will not turn o n AC power cord is not Plug the AC cord into the connected properly outlet properly Disc will not play Disc isi nserted incorrectly Reinsert d isc with l abel s ide Defective compact dis c facing up CD compartment not close d...
Accessories Included: NS-442, AC Power Cord, Remote Control, User Manual SUPPORT Please visit us on the web at www.naxa.com to get up to the minute news, alerts, and documentation for your new device. For additional assistance, please contact Naxa Technical Support.