Siemens KF 86N Series Installation Instructions And Instructions For Use page 19

Automatic connection to the home network (WLAN)
If a WLAN router with WPS function is available, the
refrigerator can be automatically connected to the
home network.
Press settings button.
1.
The |connect button lights up.The cool-fresh
compartment temperature display shows Cn.
Keep pressing N/M button cool-fresh compartment
2.
until the cool-fresh compartment temperature display
shows AC and the freezer compartment temperature
display shows OF.
Press N button freezer compartment.
3.
The appliance is ready for automatic connection.
The freezer compartment temperature display shows
an animation for 2 minutes.
The appliance is ready for automatic connection for
as long as the animation is displayed.
Within those 2 minutes activate the WPS function on
4.
the home network router (e.g. using WPS/
WLAN button. Note the information in the router
documentation).
If connection is successful, On flashes in the freezer
compartment temperature display.
The refrigerator is ready to connect to the app.
If the freezer compartment temperature display
Note:
shows OF, no connection could be established.
Check whether the refrigerator is located within the
1.
range of the home network (WLAN).
Repeat the process or establish the connection
2.
manually.
Manual connection with home network (WLAN)
If the available WLAN router does not have a
WPS function or if this is unknown, you can connect the
refrigerator to the home network (WLAN) manually.
Press settings button.
1.
The |connect button lights up.The cool-fresh
compartment temperature display shows Cn.
Press N/M button cool-fresh compartment
2.
repeatedly until the cool-
fresh compartment temperature display shows SA
and the freezer compartment temperature display
shows OF.
Press N button freezer compartment.
3.
The appliance is ready for manual connection.
The freezer compartment temperature display shows
an animation.
The appliance is ready for manual connection for as
long as the animation is displayed.
The refrigerator has now set up its own
4.
WLAN network with the network
name HomeConnect.
You can now access this network with your mobile
device.
Follow the instructions in the app until the process is
5.
complete.
– If connection is successful, On flashes in the
freezer compartment temperature display.
The device connects to the app automatically.
– If the freezer compartment temperature display
shows OF, no connection could be established.
Check whether the refrigerator is located within
the range of the home network (WLAN).
Repeat the process.
Connecting the refrigerator to the Home Connect app
The appliance automatically connects to the app with
set-up for the first time after a connection to the home
network (WLAN) has been established.
If the appliance does not automatically connect to the
app, connect the appliance manually:
Press settings button.
1.
The |connect button lights up.The cool-fresh
compartment temperature display shows Cn.
Keep pressing N/M button cool-fresh compartment
2.
until the cool-fresh compartment temperature display
shows PA and the freezer compartment temperature
display shows OF.
Press N button freezer compartment to connect the
3.
appliance to the app.
The freezer compartment temperature display shows
an animation.
As soon as the refrigerator and the app are
connected, the freezer compartment temperature
display shows On.
Open the app and wait until the refrigerator is
4.
displayed.
Use Add to confirm the connection between the app
and the refrigerator.
If the refrigerator is not automatically displayed, click
on Add appliance in the app and follow the
instructions. As soon as your refrigerator is
displayed, add it with +.
Follow the instructions in the app until the process is
5.
complete.
The cool-fresh compartment temperature display
shows PA and the freezer compartment temperature
display shows On.
The refrigerator has been connected to the app.
If the connection fails, check whether the mobile
device is connected to the home network (WLAN).
Then try to establish the connection again.
If Er appears in the freezer
compartment temperature display, reset the
Home Connect settings.
With reset, all Home Connect settings are
Note:
reset.
Checking signal strength
You should check the signal strength if no connection
can be established.
Press settings button.
1.
The |connect button lights up.The cool-fresh
compartment temperature display shows Cn.
Keep pressing N/M button cool-fresh compartment
2.
until the cool-fresh
compartment temperature´display shows SI.A value
between 0 (no signal) and 3 (full signal) appears in
the freezer compartment temperature display.
The signal strength should be at least 2. If the signal
strength is too weak, the connection may be
interrupted.
– Place the router and refrigerator closer together.
– Check that screening walls do not interfere with
the connection.
– Or install a repeater to make the signal stronger.
Home Connect
en
19