Alarm; Door Alarm; Temperature Alarm; Home Connect - Siemens KF 86N Series Installation Instructions And Instructions For Use

Alarm

en
MAlarm
D oor alarm
A l a r m
If the appliance door is left open for a while, the warning
sound is switched on and the alarm off button flashes.
Switch door alarm off:
Close the door or press alarm off button.
■
The warning sound is switched off and the
alarm off button no longer flashes.
You can switch the door alarm warning signal on or off:
Note:
On = switch on door alarm warning signal
OF = switch off door alarm warning signal
Press settings button.
1.
Press alarm button.
2.
Press N/M button freezer compartment repeatedly
3.
until the freezer compartment temperature display
shows On or OF.
Press settings button.
4.
The setting is saved.

Temperature alarm

If the freezer compartment becomes too warm, the
warning signal switches on and the alarm off button
flashes.
Caution!
Bacteria may develop during the thawing process and
spoil the frozen food
Do not refreeze thawing or thawed food.
Refreeze food only after cooking. Do not store frozen
food for the maximum storage period.
The temperature alarm can be set off without risk
Note:
to the frozen food in the following situations:
When the appliance is switching on.
■
If the freezer compartment door has been open too
■
long.
When large quantities of fresh food are put in.
■
Switching off the temperature alarm:
Check that the cause of the temperature alarm has
1.
been eliminated.
Press alarm off button.
2.
The warning sound will be switched off and the
freezer compartment temperature display will briefly
indicate the warmest temperature reached in the
freezer compartment. The display will then indicate
the set temperature again. The warmest temperature
will be measured again and saved.
The alarm off button remains lit until the set
Note:
temperature is reached again.
18
o Home Connect
T his appliance is Wi-Fi-capable and can be remotely
H o m e C o n n e c t
controlled using a mobile device.
Wi-Fi is a registered trademark of the Wi-Fi
Note:
Alliance.
In the following cases, the appliance functions like a
refrigerator without a network connection and can still
be operated manually using the controls:
The appliance is not connected to a home network.
■
The Home Connect service is not available in the
■
country in which the appliance is set up. For an
overview of the countries in which Home Connect is
available, see www.home-connect.com.
Please observe the safety instructions in this user
Note:
manual. Ensure that these are also observed if you
operate the appliance via the Home Connect app and
are not at home when doing so.
~ "Safety instructions" on page 3
Please also follow the instructions in the Home Connect
app.

Setting up Home Connect

Notes
Observe the Home Connect supplementary sheet,
■
which is available for download under http://
www.siemens-home.bsh-group.com with the
instructions. To do so, enter the E-number of your
appliance in the search field.
After switching on the appliance, wait at least two
■
minutes until internal device initialisation is complete.
Only then start setting up Home Connect.
To implement settings with Home Connect, the
■
Home Connect app must be installed on your mobile
device.
Observe the supplied Home Connect documents for
this.
Follow the steps specified by the app to implement
the settings.
The Home Connect menu will close automatically
■
when the appliance is not operated for a lengthy
period of time. You can find information on how to
open the Home Connect menu at the start of the
appropriate sections.