Table of Contents
Advertisement
Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pas retourner l'outil au détaillant.
1-800-554-6723
www.weedeater.com
Manual de Instrucciones
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Read instructions carefully before assembling.
Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual del operador y siga todas las advertencias e instruc-
ciones de seguridad. Antes de ensamblar el producto lea cuidado-
samente el instructivo. El no hacerlo puede resultar en lesiones gra-
ves.
AVERTISSEMENT:
Veuillez lire le manuel de l'utilisateur et bien respecter tous les
avertissements et toutes les instructions de sécurité. Bien lire les
instructions avant d'assembler l'outil. Tout défaut de le faire pourrait
entraîner des blessures graves.
WEED EATER
1030 Stevens Creek Road
Augusta, GA 30907
R
Instruction Manual
Manuel d'Instructions
TWIST 'N EDGE
TWIST 'N EDGE
CORDLESS
CORDLESS
850 Matheson Blvd. West
Mississauga, Ontario L5V 0B4
545186757 Rev. 2 3/4/09 BRW
Trademark
R
R
WEED EATER
Advertisement
Table of Contents
Related Manuals for Weed Eater Twist 'N Edge 545186757
Summary of Contents for Weed Eater Twist 'N Edge 545186757
- Page 1 Veuillez lire le manuel de l’utilisateur et bien respecter tous les avertissements et toutes les instructions de sécurité. Bien lire les instructions avant d’assembler l’outil. Tout défaut de le faire pourrait entraîner des blessures graves. WEED EATER 1030 Stevens Creek Road Augusta, GA 30907 545186757 Rev. 2 3/4/09 BRW...
-
Page 2: Identification Of Safety Symbols
IDENTIFICATION OF SAFETY SYMBOLS DANGER: spool, and 0.065 inch (1.65 mm) recommended trimmer line. Never use blades, flailing devices, wire, rope, string, etc. Unit is designed for line trim- mer use only. Failure to follow these instructions may result in serious injury. WARNING: This unit can be dangerous! Careless or improper use can cause serious injury. -
Page 3: Safety Rules
IDENTIFICATION OF SAFETY SYMBOLS Do not use with damaged cord. Repair or replace damaged cord immediately. Store unit indoors in a high, dry place out of the reach of children. Store unit unplugged. This unit is for household use only and not for commercial use. -
Page 4: Operator Safety
Never use wire, rope, string, etc. S Use specified trimmer spool. Make sure spool is properly installed and all parts are securely fastened. S Use only WEED EATER replacement parts and accessories as recommended. CUTTING SAFETY WARNING: Inspect area to be cut. -
Page 5: Winter Storage
plained in this manual performed by an autho- rized service dealer to avoid creating a haz- ard. S Never douse or squirt the unit with water or any other liquid. Clean unit and labels with a damp sponge. Keep handles dry, clean, and free from oil and grease. -
Page 6: Attaching The Shoulder Strap
Motor Housing Line Limiter Cutting Head Shield 2. Align the installation arrow on the shield with the installation arrow on the motor housing as shown. Installation arrows 3. Twist the shield as illustrated until it snaps securely into place. Make sure the shield is assembled to the unit as shown in the illustration below and in the KNOW YOUR TRIMMER section of this manual. - Page 7 Height adjuster Locked Unlocked 2. Adjust the length of the tube to the most comfortable operating position. 3. Turn height adjuster in the opposite direc- tion to lock. INSTALLATION OF THE WALL BRACKET WARNING: Mount the wall bracket on a smooth, vertical and internal wall. The wall chosen must be strong enough to hold the weight of the bracket and the unit.
-
Page 8: Operation
OPERATION KNOW YOUR TRIMMER READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Trigger Lock- -out Button Switch Handle Assist... -
Page 9: Correct Operating Position
tinuous charging will not damage the bat- tery. The charger will automatically keep the battery charged and ready for use dur- ing storage. S During charging, the charger becomes warm. This is normal and means the char- ger is operating correctly. TO CHARGE YOUR UNIT: 1. - Page 10 To remove spool cap: 1. Press and hold in the two cap release latches. 2. Pull cap away from the hub. release Spool latch Eyelet To reinstall spool cap: 1. Keep all areas of the cap and hub clean. Failure to do so may prevent the cap be- ing securely located in the hub.
-
Page 11: Maintenance
Mowing SWEEPING The fanning action of the rotating line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side. MAINTENANCE WARNING: Keep hands and fingers away from the trigger switch to avoid acciden- tal starting during maintenance. -
Page 12: Service And Adjustments
4. Clean entire surface of hub and spool. 5. Replace with a pre- -wound spool or cut a length of 26 feet (8 meters) of 0.065″ (1.65 mm) diameter WEED EATER brand line. Use of heavier lines could overload and damage unit. - Page 13 REPLACEMENT PART Spool with 0.065″ Trimmer Line Spool Cap Assist Handle Wheel Battery (authorized distributor replacement item) Charger GPE182- -120120- -1 Wall Mount Bracket STORAGE WARNING: Perform the following steps after each use. S Stop the unit and place in wall bracket for storage and battery charging.
-
Page 14: Limited Warranty
WEED EATER brand electric or cordless product within two (2) years from the original date of purchase. If your WEED EATER brand electric or cordless product should fail within the limited warranty period, you may return it in complete condition,...