Dtmf - Baofeng BF-UV5R Programming Manual

C.DTMF
Name
DTMF ST

(DTMF

side tone of
transmit code)
Save mode
Scan mode
PTT_ID
PTT Delay
KB_LOCK
Setting
OFF ALL: No DTMF Side Tones are
heard
KB DTMF Side Tone: Side Tones are
heard only from manually keyed DTMF
codes
Send ANI DTMF Side Tone: Side Tones
are heard only from
automatically keyed DTMF
codes
KB DTMFST+Send ANI DTMFST: All
DTMF Side Tones are heard
OFF/1:1/1:2/1:3/1:4
TO: Time Operation - scanning will
resume after a fixed time has passed
CO:
Carrier Operation
Resume Method scanning will resume
after the signal disappears
SE: Search Operation scanning will not
resume
OFF: No ID is sent
BOT : The selected S-CODE is sent at
the beginning
EOT: The selected S-CODE is sent at the
ending
BOTH: The selected SCODE is sent at
the beginning and ending
0-30ms
Description
Determines when DTMF side tones
can be heard from the transceiver
speaker
Selects the ratio of sleep cycles to
awake cycles. The higher number
the longer the battery lasts. When
enabled, a word or two might be
missed when the frequency being
monitored becomes active.
Scanning Resume Method
-Scanning
When to Send PTT-ID; Codes are
sent during either the beginning or
end of a transmission.
Signal code sending delay
If you select this option, the
keyboard is locked.
9