LENCO KCR-150 User Manual page 7

5. If the unit is not to be used for an extended period of time remove the batteries.
6. Do not try to recharge the batteries which are not intended to be recharged. They can overhead
and rupture.
EN
Push here
Slide out
Setting the clock
1. When the unit is in Standby press and hold the "CLK SET/MEM" button. The hour on the display
will begin flashing.
2. Press the "SKIP/TUNE
3. Press the "CLK SET/MEM" button again to adjust the minutes. The minutes on the display will begin
flashing.
4. Press the "SKIP/TUNE
5. Press the "CLK SET/MEM" button to finish setting the time or wait for the display to stop.
Setting the Timer
1. Press the "TIMER" button. At the display the TIMER indicator will flash.
2. Press the "TIMER" button to adjust the timer in increments of 10 minutes.
3. Press the "SKIP/TUNE
4. Wait until the display stop flashing
5. After the set time has expired the device will sound an alarm.
CLOCK
/ " buttons to adjust the hour.
/ " buttons to adjust the minutes.
TIMER
/ " buttons to adjust the timer in increments of 1 minutes.
EN
Push here
Slide out
7