Trigger Switch; Trimmer Head - Weed Eater 545186764 Instruction Manual

Motor Housing
Cutting Head
CAUTION:
Sharp line limiter blade
KNOW YOUR TRIMMER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT.
Compare the illustrations with your unit to familiarize yourself with the location of the various controls
and adjustments. Save this manual for future reference.
Upper
Shaft
Lower
Shaft
Motor
Housing
POWER CORD
The POWER CORD is where you attach your
extension cord to the unit.

TRIGGER SWITCH

The TRIGGER SWITCH is used to turn on the
unit. Squeeze the trigger switch to operate the
unit. Release to stop.
2. Twist the shield as illustrated until it snaps
securely into place. Make sure the shield
is assembled to the unit as shown in the
Shield
illustration below and in the KNOW
YOUR TRIMMER section of this manual.
OPERATION
Trigger Switch
Power Cord
Debris Shield
Line Limiter Blade
Trimmer
Head
LINE LIMITER BLADE
The LINE LIMITER BLADE cuts the cutting
line to the proper cutting length.

TRIMMER HEAD

The TRIMMER HEAD holds cutting line and
rotates during operation.
6
Instruction Manual