Weed Eater 545186762 Instruction Manual page 8

8. Insert the line into the exit hole in the hub
as shown in the illustration.
9. Align the notch with the line exit hole.
10. Push the spool into the hub until it snaps
into place.
11. Pull on the line extending outside the hub
to release it from the notch; otherwise, the
unit will not function properly.
Small
Hole
Tap
Button
USER REPLACEABLE SERVICE PARTS
REPLACEMENT PART
Spool with 0.065" Trimmer Line
Assist Handle
Bolt Carriage, 1/4-20
Wing Nut
Shield Assembly
Edge Guide
WARNING:
Perform the following
steps after each use.
Stop the unit and disconnect the power
S
source when not in use.
Carry the unit with motor stopped.
S
Store the unit so the line limiter blade can-
S
not cause injury.
Line in Notch
Spool
PART NUMBER
952701663
530403805
530403886
530016152
530404076
530403845
STORAGE
Store unit and extension cord indoors in a
S
high, dry place out of the reach of children.
Store unit unplugged.
Store unit with all guards in place. Position
S
unit so that any sharp object cannot acci-
dentally cause injury.
8
Hub
Line exit hole