Replacing The Oil Coating Unit - Minolta CF2001 Manual

(2)

Replacing the Oil Coating Unit

Removal method
NOTE
• Before replacing the oil coating unit, ensure that it is not hot.
• When placing the oil coating unit on a bench, for example, stand it upright.
1. Turn OFF the main switch,
and wait for about 20 min-
utes.
2. Open the Upper Right
Door.
NOTE
• When opening the upper
right door, be sure to sup-
port it with your hand until it
is in the fully open position.
If you remove your hand
from the upper right door, it
may drop, and the resulting
impact may cause the
4004D303AA
hinges to bend.
6