Canon ImageFormula R10 User Manual page 25

3
Click the scan mode panel appropriate for the document to be
scanned in [Select document].
The selected Scan mode panel will be displayed in orange. To edit the Scan
mode panel, see "Setting the scan mode".
4
Click the output panel for the scan image application from [2 Select
output].
The selected output panel will be displayed in orange. To edit the output panel,
see "Setting the output".
5
Click the [SCAN] button.
The document is scanned. While scanning is in progress, the number of pages
scanned is displayed in addition to the scanner settings.
When the scan is finished, the [Scanned image preview screen] opens.
If you configure scanning conditions that consume a large amount of the
computer's memory, scanning may stop because of insufficient memory. If
an error message appears due to insufficient memory while scanning is in
progress, stop scanning, change the scanning conditions, and then try
scanning again.
25