Toro Wheel Horse 16–44 HXLE Operator's Manual page 33

PROBLEM
Engine over heats. g
Machine does not drive.
POSSIBLE CAUSES
1. Engine load is excessive.
2. Oil level in crankcase is low.
3. Cooling fins and air passages
under engine blower housing
are plugged.
1. Drive control is in "PUSH"
position.
2. Traction belt is worn, loose or
broken.
3. Traction belt is off pulley.
Troubleshooting
CORRECTIVE ACTION
1. Reduce ground speed.
2. Add oil to crankcase.
3. Remove obstruction from
cooling fins and air passages.
1. Move drive control to
"OPERATE" position.
2. Contact Authorized Service
Dealer.
3. Contact Authorized Service
Dealer.
31