Setting The Height-Of-Cut; Positioning The Seat - Toro Wheel Horse 16–44 HXLE Operator's Manual

Operation

Setting the Height-of-Cut

The height-of-cut lever (deck lift) is used to raise and
lower the mower to the desired cutting height.
1. The cutting height may be set in one of seven
positions from approximately 1 to 4 inches
(38 to 116 mm).
2.
Pull on the height-of-cut lever (deck lift) and
move it to the desired position (Fig. 8).
1
1853
Figure 8
1. Height-of-cut lever (deck lift)
14

Positioning the Seat

The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
1.
2.
Approximately
1" (25 mm)
1–1/2" (38 mm)
2" (51 mm)
2–1/2" (64 mm)
3" (76 mm)
3–1/2" (89 mm)
4" (102 mm)
Raise the seat and loosen the adjustment knob
(Fig. 9).
Move the seat to the desired position and tighten
the knob.
Figure 9
1. Adjustment knob
1
1862