Disposal; Warranty; Eu Declaration Of Conformity - Festool CARVEX PSC 400 EB Original Operating Manual/Spare Parts List

CARVEX
GB
L Store the centring mandrel in the depot
3].
11 Transport
The equivalent amount of lithium in the LiIon
battery pack is less than the applicable limit
value and certified as per UN manual ST/SG/
AC.10/11/rev. 3 part III, subsection 38.3. The
LiIon battery pack is therefore not subject to
national and international dangerous goods
regulations, neither as an individual component
nor as a fitted machine component. However,
dangerous goods regulations may apply when
several battery packs are transported, in which
case you may have to fulfil special conditions.
Refer to ADR special regulation 230 for more in-
formation relevant for the EU.
12

Disposal

Do not throw the power tool in your household
waste! Dispose of machines, accessories and
packaging at an environmentally responsible
recycling centre. Observe the valid national
regulations.
EU only: European Directive 2002/96/EC stip-
ulates that used electric power tools must be
collected separately and disposed of at an envi-
ronmentally responsible recycling centre.
Return used or faulty battery packs to your local
specialist retailer, Festool after-sales service or a
designated public waste management facility.
The battery packs will then be recycled. (Observe
the regulations applicable in your country). The
batteries must be discharged on return.
EU only: European Directive 91/157/EEC stip-
ulates that faulty or used battery packs/batter-
ies must be recycled.
13

Warranty

We offer a warranty for material and production
defects for all our tools in accordance with the
locally applicable legal provisions, but for a
minimum of 12 months. Within the EU member
states, the warranty period is 24 months (veri-
fication through invoice or delivery note). Dam-
age caused by the operator, natural wear, over-
loading, incorrect handling or through the use
of the equipment not specified in the operating
manual, or damage which was known at the
time of purchase, is not covered by the warran-
ty. Furthermore, damage caused by the use of
non-original accessories and consumable ma-
terials (e.g. sanding pads) is also excluded.
22
[11- Complaints can only be accepted if the tool is
returned while still assembled to the supplier or
an authorised Festool Customer Service work-
shop. Keep the operating manual, safety in-
structions, spare parts list and purchase receipt
in a safe place. Otherwise the current warranty
conditions of the manufacturer shall apply.
Note
Due to continuous research and development
work, we reserve the right to make changes to
the technical content of this documentation.
14

EU Declaration of Conformity

Cordless jigsaw
PSBC 400 EB
PSC 400 EB
Year of CE mark: 2010
We declare under sole responsibility that this
product complies with the following directives
and standards:
2006/42/EC, 2004/108/EC, EN 60745-1, EN
60745-2-11, EN 55014-1.
Charger
TRC 3
Year of CE mark: 2007
We declare under sole responsibility that this
product complies with the following directives
and standards:
2004/108/EC, 2006/95/EC, EN 60335-1, EN EN
60335-2-29, EN 61000-3-2, EN 61000-3-3, EN
61204-3.
Festool GmbH
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Johannes Steimel
Head of Research, Development and Technical
Documentation
08.02.2010
REACh for Festool products, its accessories and
consumable materials:
REACh is a European Chemical Directive that came into
effect in 2007. As "downstream users" and product man-
ufacturers, we are aware of our duty to provide our cus-
tomers with information. We have set up the following
website to keep you updated with all the latest news and
provide you with information on all the materials used in
our existing products:
www.festool.com/reach
Serial no.
496059
496058
Serial no.
494635, 494636, 494637