Sunbeam Beatermix Pro JM5900 User Manual page 3

Features of your Beatermix
1
2
3
4
5
1. Boost button
Provides an extra burst of power for those extra tough mixing tasks.
2. High & Low speeds
3. 10 speed control switch
5 high-range speed settings for beating and mixing, and 5 low range speeds for
kneading.
4. Eject button
The eject button effortlessly releases the beaters or dough hooks for easy cleaning.
5. Special 'V-groove' beaters
Specially designed steel beaters provide maximum aeration and optimum mixing
results.
6. 5 position swivel cord
Rotates to allow for comfortable left or right hand use.
7. Powerful 150 watt motor
Handles the toughest mixing tasks.
8. Dough hooks
The strong steel dough hooks take the hard work out of kneading dough and other
heavy mixtures.
2
Pro
®
6
7
8
Using your Beatermix Pro
®
Before using your Beatermix Pro
Before fitting the beaters or dough hooks,
be sure the power cord is unplugged from
the power outlet and the speed control
switch is in the '0' OFF position.
1. Select the desired attachments, depending
on the mixing task to be performed: beaters
for mixing and beating, or dough hooks for
kneading.
Inserting the beaters
2a. Beaters can be inserted into either socket, as
the beaters are identical.
Inserting the dough hooks
2b. To insert the dough hooks, place the dough
hook with the red ring into the left socket.
Place the other dough hook into the right
socket.
Note: Ensure both beaters and dough hooks
are fully inserted into the correct sockets or
your mixing results may be affected.
Using your Beatermix Pro
1. With the speed control switch in the 'O' OFF
position, plug the power cord into a 230-240V
AC power outlet.
2. Place the beaters or dough hooks into the
ingredients to be mixed and using the speed
control switch select the desired mixing speed.
Select the Low range setting for kneading
dough and thicker mixtures, folding, or when
using the dough hooks. Select the High range
setting for mixing, beating, and whipping.
Clearly marked instructions for correct mixing
speeds for each type of mixture are shown in
the mixing guide on page 5.
Tip: Always start mixing at slow speeds
and increase the speed gradually to prevent
ingredients splashing out of the mixing bowl.
When adding dry ingredients use the lowest
speed to prevent the 'snow storm' effect.
3. Once you have finished mixing, turn the speed
switch to the '0' OFF position and unplug the
cord from the from the power outlet. Remove
the beaters/dough hooks from the mixture and
press the eject button firmly to release.
4. To remove the beaters/dough hooks, place
fingers loosely around the spindles and press
the eject button located at the front of the head
of the Beatermix Pro.
Note: Never eject the beaters or dough hooks
when the Beatermix Pro is in operation.
3