Positioning The Top - Electrolux AOFP061U Manual

- fit the oven to the top of the chiller (see picture "C")
C
- take the 3 supports and fit them into place (see picture "D")
D
Note: When installing the oven on top of the chiller, refer to the
instructions in the oven handbook.
Caution: If the chiller has a top, remove it by following the
instructions in section B.1.3.4. The stacking kit code number for
"Cook&Chill" is F881011.
B.1.3.4 Positioning the top
If the AOFP061U chiller is not to be stacked on the "Cook&Chill"
unit, order and fit the top kit (code F880027).
To fit the top, follow the instructions given below, making
reference to the steps illustrated
- take the hinge and fit it to the top of the chiller, externally on the
left, using the supplied M5X12 screws (see picture "A")
A
- position the polysterol cover (see picture "B")
B
- position the top and secure it on the front with two M5x12
screws, using the mounting holes on the crosspiece and door
bracket, and on the back with four M2x19 (see picture "C")
C
16