Table of Contents
Advertisement
1.
Important points for the user
04
This Instruction Manual is a component part of the machine and must be available to the
operating personnel at all times.
The Instruction Manual must be read before operating the machine for the first time.
The operating and specialist personnel is to be instructed as to the safety equipment of
the machine and regarding safe work methods.
It is the duty of the operator to only operate the machine in perfect running order.
It is the obligation of the operator to ensure that none of the safety mechanisms are
removed or deactivated.
It is the obligation of the operator to ensure that only authorized persons operate and
work on the machine.
Further information can be obtained at your PFAFF agent.
1.05
Operating and specialist personnel
1
Operating personnel
.05.01
Operating personnel are persons responsible for the equipping, operating and cleaning of
the machine as well as taking care of faults arising in the sewing area.
The operating personnel is obliged to observe the following points and must:
always observe the Notes on Safety in the Instruction Manual!
never use any working methods which could limit the level of safety in using the
machine!
not wear loose-fitting clothing or jewellery such as chains or rings!
also ensure that only authorized persons have access to the potentially dangerous area
around the machine!
always immediately report to the person responsible any changes in the machine which
may limit its safety!
1
Specialist personnel
.05.02
Specialist personnel are persons with a specialist education in the fields of electrics,
electronics and mechanics. They are responsible for the lubrication, maintenance, repair and
adjustment of the machine.
The specialist personnel is obliged to observe the following points and must:
always observe the Notes on Safety in the Instruction Manual!
switch off the On/Off switch before carrying out adjustments or repairs and ensure that
it cannot be switched on again unintentionally!
never work on parts which are still connected to the power supply! Exceptions are
contained only in the regulations EN 50110.
when servicing or carrying out repairs on pneumatic devices, remove the machine from
the compressed air supply! The only exceptions to this are function checks.
replace the protective coverings and close the electrical control box after all repairs or
maintenance work!
Safety
1 - 2
Advertisement
Table of Contents
