Viessmann Vitocell 050-E Installation And Service Instructions Manual page 9

Levelling the heating water buffer cylinder
Note
Seal connections that are not required with caps.
1.
A
2.
B
Fig. 2
Type plate
A
3 adjustable feet
B
3. Insert the adjustable feet into the legs as far as
they will go. Use the adjustable feet to level the cyl-
inder body.
Note
Only use one or two of the adjustable feet to level the
cylinder body. At least one of the adjustable feet must
remain fully screwed in.
Fig. 3
Do not extend the adjustable feet beyond a total
length of 35 mm.
4.
3.
3x
≤35
Installation sequence
9