Turning On The Projector; Turning Off The Projector - LG BN315-JD Owner's Manual

Turning on the Projector

1. Connect power cord correctly.
2. Remove the lens cover of the projector.
3. Press the POWER button on the remote control or top cover.
(Green operation indicator flashes if lamp is in start-up cycle.)
G An image will appear after the operation indicator light turns (Green).
G Select the source mode with the SOURCE button.
G Leave the projector plugged in for at least 1 minute 30 seconds after switching off the projector, as this will allow the lamp
cooling to continue which will help to preserve the lamp life.
* Don't unplug the power cord while the ventilation fan (inlet/outlet) is working. If so, this may increase risk of damage to the lamp.

Turning off the Projector

1. Press the POWER button on the top cover or remote control.
2. Press the POWER button on the top cover or remote control again to turn off the power.
3. If the operation indicator LED is orange and blinking, do not disconnect the supply until the
operation indicator LED is lit constantly (orange).
G If the operation indicator LED is orange and blinking, the power button on the top cover or on the remote control will not
operate.
Power Off?
Please press Power key again.
Installing and Composition
15