Ignition Device - Jeep Compass Quick Manual To Repairs

Jeep Compass
Vehicle accessibility and starting
2.2

IGNITION DEVICE

2.2.1 Keyless Go system – if provided
This function allows the ignition device to be operated by pressing
a single button, provided that the key is inside the passenger
compartment.
The START/STOP button has three operating modes. The three
modes are OFF, RUN and START.
NOTE:
If the ignition device status/mode does not change when the button
is pressed, the key battery could be nearly or completely flat. An
emergency procedure can be used to operate the ignition device in
this case. Rest the rounded end of the key (opposite side of the
emergency key) on the ENGINE START/STOP button and press
the actuate the ignition device.
START/STOP button
The start button may be set to the following modes:
OFF
• The engine is off.
• Some electrical functions, such as the central door locking
system, the alarm system etc. are still available.
RUN
• Driving mode.
• All electrical functions are available.
START
• Start the engine.