Airlink101 Raven G3210 How To Use Manual page 19

- 1 PC with XP or Win2K Operating System
- 1 GPRS Raven modem for G3210, its antenna and a source of power
- 1 Serial cable to connect the modem to your PC
- 1 software from Airlink Wireless Ace 3G that can be at the Airlink Web site
(http://www.airlink.com/support/modems/modem_utils.asp). If you do not have .NET installed on your
PC refer to the following address http://www.airlink.com/support/dotnet.asp.
- The APN (Access Point Name),the password and the username. These parameters are given by
your operator when you subscribe to GPRS. If one of this parameters is missing, you will not be able
to register your GPRS modem.
2) To activate the modem follow this procedure:
- Connect the modem to the PC through the serial cable
- Connect the antenna and the power to the modem
- Install the downloaded Wireless Ace 3G software on the PC by using unzip utility
- Execute the Wireless Ace 3G software in the Windows Start Program menu and select the Connect
button
- Select PPP connection and the serial port on which the GPRS modem is connected. Fill the
password with the default value (12345), and then OK
17/08/2007 19/ 21/