Powering On/Off Your Phone; Waking Up Your Phone - Zte BladeA3 2020 Quick Start Manual

3. Disconnect the charger when the battery is fully
charged.
NOTE:
If the battery is extremely low, you may be unable to power
on the phone even when it is being charged. In this case, try
again after charging the phone for at least 20 minutes.
Contact the customer service if you still cannot power on the
phone after prolonged charging.
Powering On/Off Your Phone
Make sure the battery is charged before powering on.

Press and hold the Power key to turn on your phone.

To power off, press and hold the Power key to open the
options menu, and touch > .
NOTE:
If the screen freezes or takes too long to respond, reinstall
the battery and power on again.
Waking Up Your Phone
Your phone automatically goes into sleep mode when it is
not in use for some time. The display is turned off to save
power and the keys are locked to prevent accidental
operations.
You can wake up your phone by turning on the display and
unlocking the keys.
1. Press the Power key to turn the screen on.
2. Swipe up on the screen.
NOTE:
If you have set an unlock pattern, a PIN or a password for
your phone, you'll need to draw the pattern, or enter the
PIN/password to unlock your screen.
FM Radio
Scanning for Channels
1. Plug in a wired headset, and swipe up on the home
screen and touch FM Radio.
2. Touch . Touch > Refresh to scan for all available
channels and save them to the radio station list.
6