Zte BladeA3 2020 Quick Start Manual page 10

information on this model phone is on file with the FCC and
can be found under the Display Grant section of
www.fcc.gov/oet/ea/fccid after searching on FCC ID:
SRQ‐ZTEA32020. The FCC ID also can be found on the device
when you open Settings > System > About phone.
For this device, the highest reported SAR value for usage
against the head is 0.601W/kg, and for usage near the body is
0.939W/kg.
While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
government requirements.
SAR compliance for body‐worn operation is based on a
separation distance of 15 mm between the unit and the
human body. Carry this device at least 10 mm away from your
body to ensure RF exposure level compliant or lower to the
reported level. To support body‐worn operation, choose the
belt clips or holsters, which do not contain metallic
components, to maintain a separation of 15 mm between this
device and your body.
RF exposure compliance with any body‐worn accessory,
which contains metal, was not tested and certified, and using
such body‐worn accessory should be avoided.
FCC Regulations
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
10