Wacom Intuos2 XD-0405-R User Manual page 137

1. From the D
RAWING
2. Select T , and then C
ABLET
3. Define tablet menu areas. Follow the prompts at the bottom of the A
Type the number of tablet menu areas you want (0-4) and press E
menu template, type 0 (zero). Digitize the upper-left, lower-left, and lower-right corners of the menu
area and then press E
number of rows and press E
4. Define the fixed screen pointing area. By default, the entire tablet is a fixed screen pointing area.
If you are using a menu template, you should re-specify the fixed screen pointing area to match the
template. Continue to follow the prompts at the bottom of the A
5. Define the floating screen pointing area—it allows you to access all areas of the screen. The floating
screen pointing area takes precedence over T
menu areas. Continue to follow the prompts at the bottom of the A
Please check your AutoCAD documentation for additional information.
E , open the T
DITOR OOLS
.
ONFIGURE
. Next, enter the number of columns and press E
NTER
. Repeat for each menu area.
NTER
Contents
Index
menu (O menu for Release 13).
PTIONS
UTO
M O , the fixed screen pointing area, and the
ABLET ODE N
CAD D
UTO RAWING
. If you do not want to use a
NTER
. Now enter the
NTER
CAD D E
RAWING DITOR
CAD D E
UTO RAWING
APPENDICES
E .
DITOR
screen.
screen.
DITOR
Page 137