Adjusting Pitch And Phase - Wacom DTF-521 Installation Manual And User's Manual

ADJUSTING PITCH AND PHASE

Some computers and video cards may not allow the auto-sync function to fully work when the DTF-521
is first connected. If some portion of text appears blurred, adjust pitch and phase by following the
procedure below. For crisp images, set the resolution of your video card to 1024 x 768.
• In the Pen Tablet control panel,
select the C
ALIBRATE
• If you are working with multiple
displays, be sure the display
corresponding to the DTF-521 is
selected in the M
ONITOR
• Click on the C
ALIBRATE
activate the calibration screen.
• Using the OSD controls, open the
OSD menu and select the P
icon. Then adjust the pitch level so
that the pattern of fine vertical
stripes displays evenly. (For details
on changing the OSD settings, see
On Screen Display (OSD) settings
on page 27.)
• In the OSD menu, select the P
icon. Adjust the phase level so that
the adjustment pattern shows
clearly.
• After completing these adjustments,
press the E and M
NTER
to exit the OSD menu.
Click on the C
ANCEL
E to exit the calibration screen.
SC
Customizing
Page 30
tab.
menu.
... button to
ITCH
HASE
buttons
ENU
button or press
Adjustment pattern for pitch and phase.