1 Lens hood
2 Lens hood lock mark
Lens hood
3
alignment mark
Lens hood mounting
4
mark
5 Zoom ring
6 Focal length scale
7 Focal length mark
8 Control ring
9 Lens mounting mark Use when mounting the lens on the camera.
Rubber lens-mount
10
gasket
11 CPU contacts
Lens hoods block stray light that would
otherwise cause flare or ghosting. They also
serve to protect the lens.
Use when attaching the lens hood.
Rotate to zoom in or out.
Determine the approximate focal length
when zooming the lens in or out.
•
Autofocus mode selected: In autofocus
mode, rotate the ring to adjust a setting
such as [Focus (M/A)] or [Aperture]
assigned using the camera. For more
information, see the description of
[Custom control assignment]/[Custom
controls (shooting)] in the camera
manual.
•
Manual focus mode selected: Rotate the
ring to focus.
Used to transfer data to and from the
camera.
NIKKOR Z 24–200mm f/4–6.3 VR Lens Manual
—
719