Creating And Saving Fine-Tuning Values - Nikon Z 5 Reference Manual

Creating and Saving Fine-Tuning Values

1
Attach the lens to the camera.
2
Select [AF fine-tuning options] in the setup menu,
then highlight [Fine-tune and save lens] and press
2 .
An AF fine-tuning dialog will be displayed.
3
Press 4 or 2 to fine-tune autofocus.
•
Choose from values between +20 and −20.
•
The current value is shown by g , the previously-selected
value by j .
•
If a zoom lens is attached, you can choose separate fine-
tuning values for maximum angle (WIDE) and maximum
zoom (TELE). Use 1 and 3 to choose between the two.
•
The larger the fine-tuning value, the farther the focal point
from the lens; the smaller the value, the closer the focal
point.
4
Press J to save the new value.
B The Setup Menu: Camera Setup
424