Operating The Control Panel - Siemens SIMATIC HMI Mobile Panel 277 RO Operating Instructions Manual

Icon
6.2.3

Operating the Control Panel

Introduction
The Control Panel is operated with the HMI device touch screen.
Procedure
Proceed as follows to change settings in the Control Panel:
1. Exit the RemoteOperate Client application by pressing
The Loader appears.
2. Open the Control Panel by means of the "Control Panel" button.
3. To open the required dialog, double-click its symbol.
4. Change as required by touching the tab.
5. Now make the necessary changes.
Touch the respective input object to make entries.
– Use the screen keyboard of the HMI device to enter the new values in the text boxes.
– Touch a button to operate it.
– Touch the selection box to open a drop down list box. Touch the required entry from
– Touch the check box to activate or deactivate a check box.
– Touch a radio button to select it.
Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA
Functions
Changing the PROFINET IO setting
Changing regional settings
Not relevant for the Mobile Panel 277 RO.
Changing S7 transfer settings
Not relevant for the Mobile Panel 277 RO.
Setting the screen saver
Reducing the backlighting
Displaying the system information
Displaying memory information
Setting the device name of the HMI device
Configuring the data channel
Setting the delay time
Changing e-mail settings
Not relevant for the Mobile Panel 277 RO.
the drop down list box.
Configuring the operating system
6.2 Control Panel
Tab / entry
–
–
–
–
"General"
"Memory"
"Device Name"
"Channel"
"Directories"
–
.
77