Setting Of Printer Functions (Printer); Setting Of Bit Switch (Sssw); Sssw-Sw05; Sssw-Sw06 - Canon Super G3 3rd Line FAX Board-AE1 Service Manual

5
Service Mode Service Mode > Setting of Printer Functions (PRINTER) > Setting of Bit Switch (SSSW) > SSSW-SW06

Setting of Printer Functions (PRINTER)

Setting of Bit Switch (SSSW)

■ SSSW-SW05

● Functional Construction
Bit Function
0 priority on LTR
1 priority on LGL
2 not used
3 not used
4 not used
5 not used
6 not used
7 priority on recording in sub scanning direction
Detailed Discussions of Bits 0 and 1
Use it to enable/disable placement of priority on LTR paper when an image that may be
printed at 100 % or in even division on A4, LTR, or LGL is received.
The setting of bit 0 and bit 1 affects the order of priority as follows:
Bit 1 Bit 0 Priority of recording paper
0 0
0 1
1 0
1 1
However, when priority is on recording in sub scanning direction, the order will be as follows
even when bit 1 and bit 0 are set to '0': LTR > A4 > LGL.
Detailed Discussions of Bit 7
Use it to enable/disable placement of priority on recording in sub scanning direction.
place: If B4 recording paper and A4 recording paper are set and an A4 extra-long
image * is received, printing will be on the B4 recording paper.
do not place: If B5 horizontal recording paper and A4 recording paper are set and a B4 image
is received, printing will be by division and on B5 horizontal recording paper.
*: Image B4 or shorter and that cannot be printed by division and on A4 recording paper.
5 Service Mode > Setting of Printer Functions (PRINTER) > Setting of Bit Switch (SSSW) > SSSW-SW06 Service Mode
1 0
place do not place
place do not place
- -
- -
- -
- -
- -
place do not place
T-5-20
A4 > LTR > LGL
LTR > A4 > LGL
LGL > LTR > A4
LTR > LGL > A4
T-5-21

■ SSSW-SW06

● Functional Construction
Bit Function
0 not used
1 not used
2 not used
3 not used
4 not used
5 reduced printing from A4 to B5
6 not used
7 not used
Detailed Discussions of Bit 5
Set whether to execute the reduction print that forcibly reduces the A4 size document into the
B5 size.
This function is invalid when outputting the report.
5-16
1 0
- -
- -
- -
- -
- -
enable disable
- -
- -
T-5-22
5-16