Telephone Directory; Store A Number/Name In The Directory - VTech t2351 User Manual

Telephone Directory

Your phone can store 10 (including the nine speed dial entries) numbers with names (up to 15 characters
for the name and 24 digits for the number) in each handset
When memory is full the screen displays MEMORY FULL, an error tone sounds, and you will not be
• Press REDIAL/
able to store a new number until you delete a stored number
PAUSE to display
the last number

Store a Number/Name in the Directory

dialed from this
phone to store
1 Press PROG The screen displays DIRECTORY
it in speed dial
2 Press SELECT. The screen displays ENTER NAME.
memory
3 Using the chart on page 14, enter up to 15 characters for the name you're storing with the number
• Each handset's
Use
speed dial entries
4. When you finish entering the name, press SELECT. The screen displays ENTER NUMBER
are independent
5 Enter the telephone number Use
from the other For
Press REDIAL/PAUSE to store a pause in the dialing sequence
example, a speed
-OR-
dial entry stored in
Press REDIAL/PAUSE if you wish to display and then store the last number dialed
HS1 cannot be
6 Press SELECT. The screen displays DISTINCT RING? and the current setting
accessed/dialed by
7 Press
HS2
to calls from this number by changing to a distinctive ringing pattern after the first ring.
Choose N for a normal ringing pattern
8 Press SELECT to confirm your selection. If you chose Y, a D will be displayed with the directory
entry
6 BASIC OPERATION
to backspace and make corrections; use
to backspace and make corrections
or to change the setting Choose Y (for yes) if you wish the phone to alert you
www.vtechphones.com
or to advance and add a space