Table of Contents
Advertisement
Getting started
Changeable handset bracket
Your telephone comes with two additional handset brackets. If desired,
change it to suit your mood or match your room decor.
To remove the handset bracket:
1.
Remove the handset image card and the clear plastic cover, if any. See
To remove the handset image card on page 7 for removal instruction.
Otherwise, go to step 2.
2.
Remove the battery compartment cover, if any. Press down firmly on
the top center of the battery compartment cover and slide downwards to
detach from the handset.
3.
Pull out the large tabs on both ends of the handset bracket away from the
slots on the handset, see Figure 1.
4.
Pull the handset bracket away from the handset so that its small tabs
release from the slots of the handset, see Figure 2.
5.
Push the handset bracket up to remove it from the handset, see Figure 3.
Figure 1
To install a handset bracket:
1.
Choose a desired handset bracket.
2.
Align the handset bracket against the handset so that the top of the
handset bracket rests on the CHARGE light of the handset, see Figure 4.
3.
Make sure the large tabs on the handset bracket are facing up. Slide the
handset bracket down onto the top of the handset, see Figure 5.
4.
Press the small tabs down into the slots on both sides of the handset until
they lock into place securely, see Figure 6.
5.
Press the large tabs on both sides of the handset bracket into the slots on
the handset, see Figure 7.
Figure 4
Figure 2
Figure 5
4
Figure 3
Figure 6
Figure 7
Advertisement
Table of Contents
