Table of Contents
Advertisement
Cautions on Installation
1. Prepare all articles necessary for installing the
source unit before starting.
2. This model features an operation panel that slides
forward.
On some types of cars, the operation panel may
make contact with the dashboard or gearshift
lever, in which cause it cannot be installed. Before
installing, check that the unit will not hamper
operation of the gearshift lever or obstruct your view
before selecting the installation location. (Figure 2)
NZ502
Dashboard
Gearshift lever
(Check that it does not
touch the LCD)
Figure 2
3. Install the unit within 30° of the horizontal plane.
4. If you have to do any work on the car body, such as
5. Use the enclosed screws for installation. Using
Gearshift lever
(Figure 3)
NZ502
Figure 3
drilling holes, consult your car dealer beforehand.
other screws can cause damage. (Figure 4)
Chassis
Max. 8 mm (M5 screw)
Figure 4
Chassis
Damage
NZ502
33
Advertisement
Table of Contents
