Wall Mounting Bracket Installation; Desk/Table Bracket Installation - VTech I6717 User Manual

Installation
Wall mounting bracket installation (optional)
Your telephone base comes with the wedge installed, ready for desktop use. If you prefer to mount
your telephone on the wall (optional), it is designed to mount on a standard telephone wall plate.
For wall mounting, follow these instructions:
• First, insert the lower portion tabs of the wall mounting bracket into the lower grooves in the
• Mount the telephone base on the wall by positioning it so the mounting studs will fit into the holes
• To remove the bracket, press both upper portion tabs firmly inward and pull the bracket downward

Desk/table bracket installation

To place your telephone base on a desk or table, insert the
wall mounting/desktop bracket.
•
• Snap the upper portion tabs of the bracket into place.
•
6
telephone base, then snap the upper portion tabs of the wall mounting bracket into place.
on the telephone base and wall mounting bracket. Slide the telephone base down on the mounting
studs until it locks into place.
until it release from the grooves.
Insert the lower portion tabs of the bracket into the upper
grooves of the telephone base.
To remove the bracket, press both upper portion tabs firmly
inward and pull the bracket upward until it is released from
the grooves.
www.vtechphones.com
lower portion tab
lower grooves
upper portion tab
upper grooves