Keypad Tone; Dial Type; Contrast; Factory Settings - VTech i 5808 User Manual

Base Menu Soft Functions
Keypad Tone (preset to ON)
Keypad tones are the beeps you hear each time
you press a key on the base unit.
To turn this feature ON or OFF:
• Press MENU. Scroll down to BASE
SETTINGS, press SELECT. Scroll down to

KEYPAD TONE.

• Press SELECT. Use
or OFF.
• Press SET to confirm.

DIAL TYPE

To change the dialing mode:
• Press MENU. Scroll down to BASE
SETTINGS, press SELECT. Scroll down to
DIAL TYPE.
• Press SELECT. Use
or PULSE.
• Press SET to confirm.
If use pulse, when dial, press * key to change to
tone dialing temporary.

Contrast

You can adjust the contrast of the base unit's
LCD screen to suit your eyes:
• Press MENU. Scroll down to BASE
SETTINGS, press SELECT. Scroll down to
CONTRAST.
• Press SELECT. Use the
keys to lower and raise the screen's contrast.
• Press SET to confirm your selection.

Factory Settings

If you wish to reset your i 5871 to the settings programmed at the factory:
• Press MENU, then scroll to BASE SETTINGS.
• Press SELECT. Use the
press SELECT.
• The screen will display RESTORE FACTORY SETTINGS ARE YOU SURE?
• Press YES to confirm, press NO to exit without resetting.

Delete Handsets

To deregister all handsets from the i 5871 base:
• Press MENU, then scroll to BASE SETTINGS.
• Press SELECT, then scroll to DELETE HANDSETS.
• Press SELECT. The screen will display DELETE REGISTRATION FOR ALL
HANDSETS ARE YOU SURE? Press YES to deregister all handsets.
NOTE: If you choose this option, you will need to re-register the handset(s) to the
i 5871 base before you can use your phone. See Installation and Registration
of Accessory Handset on page 13 for instructions.
or to scroll to ON
or to scroll to TONE
and scroll
or
Navkeys to scroll to FACTORY SETTINGS, then
34