Os Supported; Connect Your Wi-Fi Device To Your Mobile Hotspot; Use The Wps - Alcatel LINKZONE 2 Start Manual

OS supported

Windows (32 bit & 64 bit) 7/8/8.1/10
Mac OS X 10.6 to 10.11 with the latest upgrade
Connect your Wi-Fi device to your
Mobile Hotspot
1. Power on your mobile hotspot.
2. On your computer or other Wi-Fi enabled device, search for
available Wi-Fi networks and select network name (SSID)
located on the label underneath the mobile hotspot battery.
Note:
Wi-Fi name (SSID) and Wi-Fi Password is located on
the label underneath the mobile hotspot battery.
• From a Windows PC: Left-click
Connection
Choose the SSID from the list of available networks .
• From a Mac computer: Select
Network
the list of available networks.
• From an iOS device:
the list of available networks.
• From an Android device:
the SSID from the list of available networks.
3. Enter password located on the label underneath the mobile
hotspot battery and click OK.

Use the WPS

If your Wi-Fi device supports WPS, you do not have to input the
password manually after WPS connection has been established.
Please follow the following steps:
1. Power on your Mobile Hotspot and enable the Wi-Fi
function.
2. Press and hold the WPS key on your device for 3 seconds
to start the Wi-Fi Protected Setup authentication process.
on the task bar to view available networks.
-> Airport. Click
Settings
System Preferences
Advanced
-> Wi-Fi. Choose SSID from
Settings Wi-Fi
->
9
Wireless Network
to choose SSID from
settings. Choose
->